eWillys | Your source for Jeep and Willys deals, mods and more (2024)

Ted spotted this one. It looks like there’s some parts value here. It doesn’t have an engine.

“I have a clean titled 1969 Jeep Commando. The Jeep body is straight and complete with very little rust. The floor boards are solid. The negatives are the original 225 V6 is missing, the front frame is tweaked, the tailgate is rusted and the back window is not there. I am moving with to many projects. I am asking 1200.00 but will listen to any reasonable offers”

https://spokane.craigslist.org/cto/d/1969-jeep-commando/6401908029.html

No pics provided. Highly modified.

https://portland.craigslist.org/mlt/cto/d/1948-willys-cj3a-with-modern/6442066750.html

“So this is a 1948 CJ3A, titled as such with only two parts on it that are original. Everything else is from a samurai. Basically it’s a fiberglass jeep body, bolted onto a 1994 samurai frame with all samurai running gear. It was built to be ultra light, with the bench mark of below 1800 lbs which meets the legal requirements for a side by side (class IV UTV) to go on side by side only delegated trails. It’s also a fully insured street legal registered 48 cj3a (no DEQ to meet). The fiberglass body is also made to be 8” longer than a stock CJ3A has to accommodate taller drivers. Why a samurai? Everything on a samurai is built to be lightweight. The engine is fuel injected, aluminum block and heads, fully dressed weights 175 lbs…….. If you think bolting a chevy 350 inside a CJ2A is a good idea this rig probably isn’t for you. If you recognize the biggest advantage you can have off road is lightweight, we should talk. It takes the idea of “go anywhere” to a whole new level.
Continue reading →

Rick spotted these late model Heavy Duty Selectro hubs for sale.

“New 5-bolt front hubs for 1978-1981 Jeep CJ. p/n 5358568H. 3 available. All are unused. 2 are dirty from storage but bearing surfaces are good. $60 each.
Selectro locking hubs for same are also new. $60 each, 2 available.
**$200 for 2 front hubs and 2 locking hubs.**”

https://brunswick.craigslist.org/pts/d/jeep-cj5-cj7-scrambler-hubs/6428039986.html

Today’s the last day of the year, so let’s go out in style with Alaska Paul’s placard progress. Paul understands that his one-of-a-kind electrically and mechanically designed jeep will require information assistance just in case any of us lesser mortals attempt to drive it. So, he spend some time over the holidays playing with placards.

Paul writes, “It’s been a while, soI figured I’d send some Willys progress photos your way. This photo is of the fuel valves between the front seats with an engraved placard sitting on the metal cover. A local sign shop (Alaska Laminated Signs) made up some test placards so I could see how different colors would look with the stainless, gray and blue interior of the Willys. While this placard has all the necessary information and the correct shape to fit the metal cover plate I wasn’t too happy with the black background and the white lettering. I wanted something with more visual appeal so Dave (the sign shop owner) duplicated this placard using a brushed aluminum outer layer over a black base.(see next pic)”

“This aluminum/black combination looks good by itself but I didn’t feel it looked good when it was placed next to the stainless steel parts so Dave made a third placard using a dark blue upper layer and a white base (see next pic).”

“Now this is what I was looking for. While the blue on the placard isn’t a perfect match to the blue on the seats they’re close enough so they look good together and the contrast between the white letters and the blue background makes it bright and easy to see. Now that we had a color selected I gave Dave my metal full size patterns for the five placards needed for the little Willys and he began the cutting and engraving process.”

“Here’s the finished product. From left to right we have the overhead switch placard, the circuit breaker placard and below that is the fuel tank selector placard and the final two placards are for the 12 Bosch relays (two rows of six each) in the electrical bay just aft of the passenger seat.

The placards fit perfectly which made installing them a fast and simple task.”

“The electrical bay with the placards installed. It’s hard to see but just below the row of number 1 thru 6 relays is another row of 7 thru 12 relays but not all are in use right now. I wired in some extra relays and extra circuit breakers incase someone wanted to install additional electrical equipment in the future.” Continue reading →

What I find interesting about this brochure is that the front cover includes a small information bit noting that the Kelly All-Steel Jeep CAB was “KNOWN ALSO AS THE KEMCO CAB”. If the date is accurate, this suggests the shift in branding from KEMCO to Kelly around 1956.

View all the information on eBay

UPDATE: SOLD, Was on eBay. As I understand it, this top was quietly manufactured for Willys Motors by Koenig, but never branded a Koenig. I am also of the belief that it fits both the CJ-5 and the DJ-3A, though the latter needs the windshield with ‘wings’ to fit.

This brochure makes it clear that the CJ-5 hardtop with sliding doors also provided an option for hinging the door instead. I think Mike might have told that was an option, but I’d never seen documentation of it until now.

This is a series of datasheets from circa 1958 on eBay. The start prices are $12 each.

1. CJ-5: View all the information on eBay
2. CJ-3B: View all the information on eBay

Continue reading →

Nick named the “Beer Runner”, the builder of this jeep made an effort to do something a little different.

“Retro -Style – One of a Kind.
Frame Off Restoration – $23,000 spent for restoration alone.
Deep Red Custom Paint
Custom Wheels, New BF Goodrich All-Terrain tires (will include extra set of “on-road” tires)
New Front/Rear Axles, Disc Brakes
Custom Roll Bar
Vinyl Top
Chrome Bumpers
AM/FM Radio
Wood Steering Wheel
Off Road Lights
Restored Seats
Soft Doors (Not Installed)
Chrome Step/Accessories
44 Magnum Shift Knob
2 Wheel Drive
Towing Hard Points Front/Rear.
Hand Painted Graphics:
Beer Runner – Coors SS Keg Bolted in Rear Bed.
Original Drive Train: Hurricane 4-134 FHead Engine with T-90 3 Speed Rebuilt Transmission/New Clutch.
Odometer 19,000 Mileage Unverified.”

https://charlotte.craigslist.org/cto/d/1963-jeep-willys-cj-5-mint/6442906158.html

UPDATE: **Status Unknown** Was $8000.

It looks clean, though not restored quite to original.

“I’m selling my beautiful 1948 CJ2A. Restored to original condition. I drive it around town, but want to clear the room for another restoration. The engine, transmission, body and suspension all original. I have the bows for the top but never installed it. It has been converted to 12 volt. Runs great!”

UPDATE: Price dropped to $16,000.

(11/02/2017) Has a variety of updates. Looks good.

“1947 Willys CJ, 1968 327 with performance heads, roller tip rockers, cam, performance intake, Holly 650 carb, MSD ignition, entire exhaust system is ceramic coded, flowmaster mufflers, muncie 4 speed, overdrive, 427 gears front and rear, locking rear hubs, fox shocks, new tires and wheels, off road lights, new optama battery, new autometer gauges, new heater, new stereo with amp, 15 gallon fuel cell, powder coated tow bar and front bumper, full enclosure with doors, rear seat, train horn, tow hooks, beautiful jeep….”

https://ventura.craigslist.org/cto/d/1947-willys-cj-2-jeep/6439512200.html

UPDATE: **SOLD** Was $6500.

This is an interesting rig. It’s listed as a 1956, but it’s got a ’52/’53 hinged grille. It’s got an M-38A1 body, but doesn’t have the battery cowl lid or lip.

“Cute and fun to drive…5 New tires from Discount tires $1,000…new exhaust system from manifold to rear…new front brakes.

Motor is a 232 Ambassador 6 not the small 4 & 6 cylinder motors offered.

All Canvas in good shape…windows zip down…ready for a winch…has hitch for towing.

Motor does not smoke at all….fresh points and new Coil…fresh Oil Change and Filter…fresh fuel filter and new air cleaner.

I have some extra parts such as races and bearings and seals for the front locking hubs…so ask for them if you buy the jeep.”

UPDATE: This was supposed to have been auctioned in Nov. 2017. Either it didn’t sell or it did and the buyer is ready to sell.

“1961 WILLYS CJ3B 4X4 RUNS AND DRIVES ALL LIGHTS WORK COMES WITH SNOW PLOW”

https://newyork.craigslist.org/brk/cto/d/1961-willys-cj3b-4×4/6443028537.html

Some more work is needed on this project.

“1953 Willys with a frame up restore project
Frame has all new brakes and brake lines
professionally done.
Runs and drives
Comes with all new parts to finish this project
Includes new vinyl top and doors
New gauges
New rear tail lights
New windshield wipers
New battery
To many to list
Body is bolted on just to show new owner it runs and drives.Needs final bolt down.
All new fenders and floor boards

75% complete project with plates and title in hand. Have receipts for over 3,000 in parts
Serious inquiries only”

https://portland.craigslist.org/clc/cto/d/1953-willys-jeep/6441644608.html

UPDATE:**SOLD** Was $14,500.

This is a militarized CJ-3A.

“Starts and runs great, new tires and goodies added over last 3 months, spent around $7000 fixing up. Fun and head turner. $14,500 OBO. Maybe trade?”

UPDATE: **SOLD** Was $1500/each

There may be some value here.

“FOR SALE!! If interested, please email me with any questions,name, a phone number I can text ( much easier for me), and I will get back to you as soon as I can. Clean titles for all. Not interested in trades. I have A running original drivetrain, blue 56 Willys CJ5 hurricane four, three speed 4×4 with dana sealed axles. It smokes a little but runs and drives. Perfect candidate for a restoration $1500. Grey 76 CJ5 232 straight six, three speed trans, 4X4 with extra frame, driver or toy $1500.”

UPDATE:**SOLD** Was $6500.

I wonder if the toy jeep is included.

“1960 M422 MIGHTY MITE for sale,$6500 #366 12/20/1960,complete jeep,has correct early windshield frame and and glass,missing canvas seat bottoms,solf top and bows,sorry no title,bill of sale,motor complete,never tried to get it started,comes with a NOS FUEL TANK AND DEEP FORDING KIT,has all 5 correct rims,jeep located in Pemberton NJ next to Fort Dix 08068”

It still needs some work.

“This is a very clean and insanely rust free original body ’51 CJ3-A. The previous owner did all the paint work, and engine swap. It is nearly complete. Needs some tuning and timing. The t-90 transmission needs to be serviced or rebuilt. I contacted Washougal Classic Jeep about this job, and it is a fairly affordable job through them, or even a fairly easy rebuild to tackle at home if you are so inclined. The seats have been freshly reupholstered. Soft top is older and has a few tears, but does fold, and all the zippers work. Has new electric wiper motors also. Fiberglass hood. One tire has a slow leak, but i think it is a valve stem issue. it doesn’t have any punctures that I can locate.

231 Buick V6 swap is neat and well done. Aluminum radiator, electric fan. I have had it up and running, but have not driven it.
I picked this Jeep up in a trade thinking I would finish it up and do some wheeling, but another project is calling my name more. Needs a new owner who loves these old jeeps to wrap it up and have a really killer little rig. Clean OR title. Currently runs but DOES NOT DRIVE. BRING A TRAILER. I won’t bring it to you, or do any of the work it needs for you. For sale as-is, where it is.”

https://portland.craigslist.org/mlt/cto/d/1951-jeep-willys-cj3-buick-v6/6443080061.html

UPDATE: **SOLD** Was $800. This has become a MUST SELL situation.

(06/05/2017)“Medical Issues, must Sell !!
1945 Ford GPW 4X4 JEEP. Clear Title. Runs Great !
Engine is mid 1960 Mustang, rebuilt with about 1000. miles on it.
New Clutch. Original Trans and transfer case. I have the rebuild kits for the brakes, and New master cyl.
Runs good,Drives good, needs brakes fixed. New Gauges,( have originals included).
Have original Radiator. NEW Driver side seat frame, New spare tire bracket.
Reel Cool WWII Navy Jeep. Engine is worth asking price..
I have medical issues that makes me need to sell it.”

UPDATE: **Status Unknown** Was $2980.

The windshield on this M-38A1 appears fixed. This may have a V-6. The price has dropped on this one.

“motor full inyección turbo front gran national gauches more”

UPDATE: **SOLD** Was $1600.

Looks like a good price.

“Two 1948 Willys jeeps. Old Flat fenders. Been sitting for years , need work. Not much rust. One has good clear colo . title. health reasons I can no longer repair these old dreams. build one or two. also extra parts . $1600 Cash for both”

It runs, It might make a good parts vehicle.

“1957 jeep willy for repair or parts. Engine does start and run but frame is rotted through. Comes with plow. Tires all hold air. 4 wheel drive edition”

https://hartford.craigslist.org/cto/d/1957-jeep-willys-with-plow/6440845145.html

Seller has a variety of parts.

“Here’s more pictures of parts.
Call to work out pricing. Negotiable
I have 2 willys I’m parting out”

https://dallas.craigslist.org/sdf/pts/d/willys-48-cj2-parts/6442127074.html

It’s listed as a 1955.

“Super clean jeep 255 buick V-6
You wont find another like it , no rust, triple stick , Detroit lockers, brand new tires . Price is non negotiable I am selling for money to move . I will have no problem loading on trailer and taking it with me .”

https://salem.craigslist.org/cto/d/55-willys/6440810989.html

UPDATE: **SOLD** Was $1500.

The price is right.

“1962 Jeep camo paint ready for hunting or whatever? Absolutely quiet runs amazing! 4×4 works great also!’

UPDATE: **SOLD** Was $7800.

(12/14/2017) This is a neat jeep. It’s a Navyordered CJ-5. It appears to havea gov plate attached to the dash. It includes a ventilating windshield. Looks like the passenger rear sidehas been patched.

“1965 Naval Military Jeep is one of 600 made. Most are not running. This jeep was owned by Russell Dees Military Vehicles and I now own it. I just had Knico engines in Moultrie Ga do the rebuild on this 4cyl engine that has warranty. I had Hayman’s Garage Albany Ga put new clutch, brakes, brake lines, alternator,water pump,radiator, hoses, belts and new gas tank and ignition . The body is in good condition with only a spot of surface rust here and there. Tires are almost new . A rare opportunity to own a collectable part of military history.”