How much does it cost to replace a serpentine belt on a Toyota RAV4?

The average cost for a Toyota RAV4 Serpentine Belt Replacement is between $93 and $110 . Labor costs are estimated between $56 and $71 while parts are priced between $36 and $39.

What is a serpentine belt tool kit?

The CRAFTSMAN® Serpentine Belt Tool provides the leverage and clearance needed to remove the tensioner pulley that holds the belt in place . The long handle and extension allows the tool to service a wide variety of vehicles. Designed to provide access and leverage to hard to reach pulleys.

How many hours does it take to replace a serpentine belt?

Plus, replacement is relatively easy, and if you're wondering how long does serpentine belt service take, it's less than an hour for most vehicles.

How long does a serpentine belt last on a Toyota RAV4?

Generally, serpentine belts last around 5 years or up to 100,000 kilometers before replacement becomes necessary.

Do you need a special tool to replace serpentine belt?

Tools/Supplies Needed: ratchet and socket set . torque wrench. new replacement belt.

What tools do you need to change a belt?

There are only a few things you'll need to replace a serpentine belt: a new belt, a belt tensioner tool and maybe a socket wrench . These things should be easy to find at an auto parts store. Gloves and eye protection never hurt either. Every car engine is different, even engines from the same auto manufacturer.

What does a serpentine belt kit include?

GATES COMPLETE ™ SERPENTINE KITS INCLUDE: Gates Micro-V Serpentine Belt(s) [Stretch-Fit belt where required] Related DriveAlign ® Tensioner(s) Idler Pulley(s) included as required, per system.

How much does Toyota charge to replace serpentine belt?

The average cost for a Toyota Corolla Serpentine Belt Replacement is between $81 and $104 . Labor costs are estimated between $49 and $62 while parts are priced between $32 and $42.

How often should Toyota serpentine belt be replaced?

When should a serpentine belt be replaced? The serpentine replacement interval is about every 60,000 – 100,000 miles . Because of their rubber material, serpentine belts will crack, peel, and wear down over time.

Is it safe to drive with a serpentine belt problem?

A broken serpentine belt can be dangerous while driving and could cause serious damage to your engine . Again, since every car is different, it's recommended you check your specific vehicle's owner's manual for the manufacturer's recommendation around replacing the serpentine belt.

How can I tell if my serpentine belt is bad?

One of the earliest signs of a failing serpentine belt is a high-pitched squealing or whining noise, especially during engine startup or when turning the steering wheel . This noise is typically caused by the belt slipping on the pulleys due to reduced tension or deterioration.

Toyota RAV4 Belt Tools — CARiD.com (2024)

CAR ID

0Change
Shopping Cart0

Lisle®Driving Wrench
# 3651218677
Universal Driving Wrench by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading...
Designed to help to get your job done rightManufactured utilizing the highest quality materials
$17.23 - $25.64
Lisle®Socket
# 4561058566
Universal Socket by Lisle®. If you’re looking for a reliable solution to complete your project, this 1st-grade product is right up your alley. Designed utilizing the finest materials, it delivers unmatched levels of durability and...
Designed to help to get your job done rightManufactured utilizing the highest quality materials
$6.40 - $7.18
Lisle®Square Drive Socket
# 3880382448
Universal Square Drive Socket by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$6.29 - $6.30
K-Tool International®Socket
# 3651223200
Universal Socket by K-Tool International®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great...
Expertly crafted from premium materialsDesigned to match rigorous quality standards
$4.79 - $8.78
K-Tool International®Wrench
# 3651221399
Universal Wrench by K-Tool International®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great...
Expertly crafted from premium materialsDesigned to match rigorous quality standards
$4.31 - $21.79
Lang Tools®Male Square Ratcheting Serpentine Belt Wrench
# 4922848860
Universal Male Square Ratcheting Serpentine Belt Wrench by Lang Tools®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet...
Designed to release the tension on spring-loaded idler pulleysHeat treated and nickel chrome plated for durability, appearance, and long tool life
$37.21
Gates®Krikit ll V-Ribbed Belt Tension Gauge (91132)
# mpn4786935720
Universal Krikit ll V-Ribbed Belt Tension Gauge by Gates®. Gates Krikit II gauges provide a simple and quick way to measure V-ribbed belt tension on passenger cars, light trucks, heavy trucks and buses to ensure long belt life and...
Made to meet international standards for quality and safetyManufactured using innovative technologies
$27.98
Lisle®11-piece Serpentine Belt Kit (59670)
# mpn4786935794
See Also
Toyota Belt Tools — CARiD.com
Universal 11-piece Serpentine Belt Kit by Lisle®. Releases Tension on Serpentine Belts With a Spring Loaded Idler Pulley. This tool is used to remove and install belts on serpentine belt systems using the spring loaded idler pulley. For...
Made to meet international standards for quality and safetyManufactured using innovative technologies
$81.56
Gates®Belt Checking (91209)
# mpn1894210340
Universal Belt Checking by Gates®. Dual-pin design affords convenient belt push/pull capability. Time-saving tool affords improved control and reach when installing serpentine belts. Also helps install V-belts and timing belts located...
Designed to help to get your job done rightManufactured utilizing the highest quality materials
$27.41
Gates®Krikit V-Belt Tension Gauge (91107)
1
# mpn4786935796
Universal Krikit V-Belt Tension Gauge by Gates®. Gates Krikit gauges provide a simple and quick way to measure belt tension on V-belts to ensure long belt life and optimal belt drive performance. This easy-to-use gauge is designed for...
Scale reads in pounds and kilogramsDie-cast aluminum body, nylon indicator arm and pressure pad
$30.93
Gates®Micro-V Stretch Fit Installation Tool (91030)
# mpn1877723
Universal Micro-V Stretch Fit Installation Tool by Gates®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and...
Designed to help to get your job done rightManufactured utilizing the highest quality materials
$15.75
Gates®SB Cutter (91215)
# mpn4678194137
Universal SB Cutter by Gates®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an...
Designed to help to get your job done rightManufactured utilizing the highest quality materials
$52.48
Gates®Telescoping Pole (91233)
# mpn1894210339
Universal Telescoping Pole by Gates®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Designed to help to get your job done rightManufactured utilizing the highest quality materials
$43.33
CTA®26-1/2" Spring Loaded Serpentine Belt Tool (2740)
# mpn1452813643
Universal 26-1/2" Spring Loaded Serpentine Belt Tool by CTA®. When it comes to quality, CTA knows no compromises. All the products made by this stringent quality control conditions. The latest manufacturing methods coupled with the use...
Specialty tools to get your job done in a safer and easier fashionPractical and efficient solutions for pros and diyers alike
$33.62
CTA®Tensioner Adjuster Socket (2717)
# mpn1848112
Tensioner Adjuster Socket by CTA®. When it comes to quality, CTA knows no compromises. All the products made by this stringent quality control conditions. The latest manufacturing methods coupled with the use of the highest-grade...
Specialty tools to get your job done in a safer and easier fashionPractical and efficient solutions for pros and diyers alike
$10.70
Lisle®1/2" Square Drive Socket (57560)
# mpn1611066
Universal 1/2" Square Drive Socket (57560) by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$6.29
Lisle®15 mm Socket (57440)
# mpn4737653717
Universal 15 mm Socket (57440) by Lisle®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great...
Designed to help to get your job done rightManufactured utilizing the highest quality materials
$7.18
Lisle®16 mm Socket for 59800 Serpentine Belt Tool (57580)
# mpn4828766738
Universal 16 mm Socket for 59800 Serpentine Belt Tool (57580) by Lisle®. If you’re looking for a reliable solution to complete your project, this 1st-grade product is right up your alley. Designed utilizing the finest materials, it...
Designed to help to get your job done rightManufactured utilizing the highest quality materials
$6.40
Lisle®2" Driving Wrench (43420)
# mpn1610562
Universal 2" Driving Wrench (43420) by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$24.77
Lisle®2-1/8" Driving Wrench (43340)
# mpn1610010
Universal 2-1/8" Driving Wrench (43340) by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$17.23
Lisle®3/8" Square Drive Socket (57530)
# mpn1611065
Universal 3/8" Square Drive Socket (57530) by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$6.30
Lisle®32 mm Driving Wrench (43380)
# mpn1610361
Universal 32 mm Driving Wrench (43380) by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$19.43
Lisle®36 mm Driving Wrench (43390)
# mpn1611258
Universal 36 mm Driving Wrench (43390) by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$17.71
Lisle®40 mm Driving Wrench (43440)
# mpn1610362
Universal 40 mm Driving Wrench (43440) by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$19.43
Lisle®7/8" Driving Wrench (43430)
# mpn1610011
Universal 7/8" Driving Wrench (43430) by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$25.64
Lisle®Handle Assembly Of Serpentine Belt Tool (59780)
# mpn1608061
Universal Handle Assembly Of Serpentine Belt Tool by Lisle®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship....
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$22.71
Lisle®Ratcheting Serpentine Belt Tool (59000)
# mpn1610146
Ratcheting Serpentine Belt Tool by Lisle®. Releases tension on serpentine belts With a spring loaded idler pulley. Skin-Packed. Ratcheting head with freewheel position allows maximum leverage. Set ratcheting head to the middle or...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$63.03
Lisle®Serpentine Belt Tool (59800)
# mpn1610913
Serpentine Belt Tool by Lisle®. Releases tension on serpentine belts With a spring loaded idler pulley. Skin-Packed. Ratcheting head with freewheel position allows maximum leverage. Set ratcheting head to the middle or neutral/freewheel...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$57.10
Lisle®Stretch Belt Remover (59370)
# mpn1609058
Universal Stretch Belt Remover by Lisle®. Combination removal and installation tool For most stretch belt applications found on many accessory drive systems. Skin-Packed. Unique magnetic faces hold the tool in place on the pulley. Helps...
Expertly crafted using premium-grade materialsUnsurpassed in functionality and reliability
$19.73
ATD®Tru-Grip Serpentine Belt Tool (8604)
# mpn1578184951
Universal Tru-Grip Serpentine Belt Tool by ATD®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver...
Clamping jaw allows user to position the belt without the belt slipping out of the toolTru-grip and long reach allows belt routing in tight access areas
$30.94